Power Cable

Heat Shrinkable Anti-Tracking Cable Breakout

Item Code: CIBR

With the thorough knowledge of the varied aspects of the market, we have been able to put forth the clients a commendable assortment of Heat Shrinkable Anti Tracking Cable Breakout (Red). Developed in conformation with the global quality standards, the range is widely used a component in cable joining kits applicable for covering the joint area as a protective shield.

Offered in varied specifications, the range is acknowledged for the following attributes:

• Perfect dimensions
• Excellent insulation
• High wear strength
• Longer service life

Specifications:

Heat Shrinkable Two, Three & Four Way Cable Breakout

Item Code: CLV

We are instrumental in catering to the diversified demands of the customers by bringing forth a remarkable assortment of Heat Shrinkable Two, Three & Four Way Cable Breakout. The offered range is incorporated with a thermoplastic adhesive liner that provides complete protection against from insulation.

Additionally, the range is available with the following features & specifications:

• Shrink temperature: 135° C
• Continuous operation temperature: -55° C to 100° C
• Provides strain relief & mechanical protection
• Shrink ratio accommodates a wide range of cables
• Seals & protects multi-conductor cable and conduit breakouts

Technical Data :

Heat Shrinkable Straight Boot

Item Code: CSB

In order to cater to the diversified demands of the customers, we are engaged in catering to the diversified demands of the customers by bringing forth a commendable assortment of Heat Shrinkable Straight Boot. Fabricated in accordance with the global quality standards, the range is widely used for providing insulation to bushings in the cable termination box.

Some of the major attributes of the range are:

• Compact design
• Robust construction
• Easy installation
• Safe usage

Specifications:

Heat Shrinkable Creepage Extension Shed Rain

Item Code: CBQ-130

We are counted among the prominent organizations engaged in manufacturing, supplying and exporting a commendable assortment of  Heat Shrinkable Creepage Extension Shed Rain. Developed in accordance with the global quality standards, the range is extensively used in a plethora of industrial applications.

Offered in varied sizes & specifications, the range is acknowledged for the following attributes:

• High conductivity
• Superior insulation
• Excellent performance
• Low loss value

Specifications:

Heat Shrinkable Busbar Insulation Tape

Item Code: CBBIT

With the aid of modern tools and sophisticated technologies, we have been able to provide the customers with a comprehensive assortment of Heat Shrinkable Busbar Insulation Tape. Our assortment includes tapex, resin cast and push on type cable jointing systems. The entire range is fabricated in accordance with the global quality standards by employing superior-grade components and latest techniques.

Some of the finest attributes of our range are:

• Superior insulation
• Excellent conductivity
• Easy installation
• Safe usage

Heat Shrinkable Busbar Insulation Tubing

Item Code: CBBC

Driven with perfection, we are engaged in catering to the variegated requirements of the customers by bringing forth an array of Heat Shrinkable Busbar Insulation Tubing Red & Brown. Our range is developed in strict accordance with the global quality standards by employing genuine raw material, advent tools and sophisticated technologies.

Available in a plethora of sizes & specification, the range is acknowledged for the following attributes:

• Error-free performance
• Excellent insulation
• Quick & easy installations
• High conductivity

Specifications:

Heat Shrinkable Wraparound System

With our expertise of this domain, we are engaged in manufacturing and supplying Heat Shrinkable Wraparound System for Plastic or Metal Sheathed Cable. The range of heat shrink wraparound sleeves offered by us are manufactured in accordance with industry norms and using thermally stabilized cross-linked polyolefin with a hot melt adhesive liner on the inner side of the sleeves. The adhesive melts and the sleeves shrink upon heating and creates a water tight bond between cable joint assembly components or cable sheath and the sleeve.

Offered products are manufactured in compliance with international standards and applauded by the customers for their following attributes:

• Provides water tight seal upon recovery
• Excellent mechanical strength
• Corrosion-resistance
• Application procedure is quick, simple & clean
• Covered with thermo chromatic paint that changes color upon achieving correct shrink temperature
• Stainless steel channel provides permanent closer system
• Easy to install in situ over the live cable without cutting the cable or shutting down power
• UV resistant
• Moisture proof
• Durable cable Jackets & encapsulation of cable joints

Specifications:

• Only 6 sizes for wide range of cable diameters from 10 mm to 165 mm
• Available in 4 standard lengths
• Also available in customized lengths
• Weather resistant
• Halogen free
• No requirement of power shut down
• High shrink ratio cover even irregular shapes
• Continuous operating temp 55 ^O C to 110 ^O C
• Sleeve can be cut to suit shorter application requirements
• Suitable for use for rejecting of cable joints

Silicone Rubber Right Angle Bushing Boots

We are recognized as an eminent organization engaged in manufacturing and supplying Medium Voltage Cold AppliedSilicone Rubber Right Angle Bushing Boots. Offered bushing boots are widely used on screened or rubber insulated cables of 7.2 to 17.5 kV for protection of switchgear and transformer. These bushing boots are manufactured by using optimum quality material and following the norms already set by the industry. A team of experts stringently examines these boots, so as to maintain higher quality standards and remove defects, if any.

Specifications:

• Covers right angle or straight connections for cable size 35-400 mm
• Designed for use on either single or three core cables from 35 up to 400 mm
• Also suitable up to a maximum system voltage of 17.5 kV
• Bushing boots can accommodate bushings with diameters between 30-70 mm

Features:

• After completion of the termination, circuit be energized immediately
• Designed to fit all typical standard cable lugs
• High interface pressure ensures absolute water tightness
• Requires no specialized tools
• Suitable for angled position
• Compatible with industry-approved cable cleaners
• No heating or filling required

Cold Applied Right Angle Bushing Boots

With thorough knowledge of the industry, we are engaged in manufacturing and supplying Cold Applied Right Angle bushing boots. Manufactured in tandem with international standards, these bushing boots are used on indoor terminations of power cables and in switchgear & transformers cable end boxes. All these boots are manufactured under the guidance of experienced professionals, who ensure to maintain higher standards of quality and eliminate flaws, if any. We also offer these bushing boots in customized range, as per the requirements of the patrons.

Applications:

• Suitable for power cables maximum rated 17.5 KV, XLPE, EPR and paper insulation cable with aluminum or copper conductors
• Used in switchgear & transformers cable end boxes, in which the cores of the cables are terminated vertically from below & are connected to fixed bushings
• Designed for use on either single or three core cables form 35 sq mm to 400 sq mm
• Bushing boots can accommodate bushing with diameter between 31-70 mm

Features:

• Circuit be energized immediately after completion of the termination
• Designed to fit all typical standard cable lugs
• High interface pressure ensures absolute water tightness
• No need for specialized tools
• Compatible with industry-approved cable cleaners
• No heating or filling required
• Suitable for angled position